 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| IP117MAHVH IP117MHVH LM117HVH IP117MAH IP117MHA LM117H00 MECHANICAL DATA Dimensions in mm (inches) 8 .8 9 (0 .3 5 ) 9 .4 0 (0 .3 7 ) 7 .7 5 (0 .3 0 5 ) 8 .5 1 (0 .3 3 5 ) 5 .0 8 (0 .2 0 0 ) ty p . 0.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR 2 .5 4 (0 .1 0 0 ) 6 .1 0 (0 .2 4 0 ) 6 .6 0 (0 .2 6 0 ) 0 .6 6 (0 .0 2 6 ) 1 .1 4 (0 .0 4 5 ) 0 .8 9 m a x . (0 .0 3 5 ) 7 .7 5 (0 .3 0 5 ) 8 .5 1 (0 .3 3 5 ) d ia . 0 .7 1 (0 .0 2 8 ) 0 .8 6 (0 .0 3 4 ) ! FEATURES 45 1 2 .7 0 (0 .5 0 0 ) m in . * Ouput Voltage Range Adjustable: 1.25 to 40V For Standard Version 1.25 to 60V For -HV Version * 1% Output Voltage Tolerance (-A Versions) H Package TO39 Pin 1 = Vin Pin 2 = ADJ. Pin 3 =Vout * 0.3% Load Regulation * 0.01% / V Line Regulation * Complete Series Of Protections: * Current Limiting * Thermal Shutdown * SOA Control * Also Available In Ceramic SMD1 and LCC4 Hermetic Ceramic Surface Mount Packages. DESCRIPTION The IP117M Series are three terminal positive adjustable voltage regulators capable of supplying in excess of 0.5A over a 1.25V to 60V output range. These regulators are exceptionally easy to use and require only two external resistors to set the output voltage. In addition to improved line and load regulation, a major feature of the "A" series is the initial output voltage tolerance, which is guaranteed to be less than 1%. Over full operating conditions, including load, line, and power dissipation, the reference voltage is guaranteed not to vary more than 2%. These devices exhibit current limit, thermal overload protection, and improved power device safe operating area protection, making them essentially indestructible. ABSOLUTE MAXIMUM RATINGS (Tcase = 25C unless otherwise stated) VI-O PD TJ TSTG Input - Output Differential Voltage Power Dissipation Operating Junction Temperature Range Storage Temperature - Standard - HV Series 40V 60V Internally limited -55 to 150C -65 to 150C Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Prelim. 7/00 IP117MAHVH IP117MHVH LM117HVH IP117MAHV IP117MA Min. Typ. Max. 1.238 1.220 1.25 1.250 0.005 0.010 5 0.1 15 0.3 0.002 CADJ = 0 CADJ = 10mF TJ = -55 to +150C 66 65 80 50 0.2 100 5 66 VOUT 5V VOUT 5V IOUT = 10mA to IMAX TJ = -55 to +150C Thermal Regulation Ripple Rejection IADJ Adjust Pin Current tp = 20ms VOUT = 10V f = 120Hz VOUT 5V VOUT 5V 1.262 1.270 0.010 0.020 15 0.3 50 1 0.020 1.200 IP117MAH IP117MHA LM117H00 IP117MHV , IP117M Min. Typ. Max. Units V 1.250 0.010 0.020 5 0.1 20 0.3 0.030 65 80 50 0.2 100 5 1.300 0.020 0.050 15 0.3 50 1 0.070 V Parameter VREF Reference Voltage Test Conditions IOUT = 10mA IOUT = 10mA to IMAX VIN - VOUT = 3V to VMAX P PMAX TJ = -55 to +150C TJ = -55 to +150C IOUT = 10mA to IMAX DVOUT Line Regulation 1 DVIN DVOUT Load Regulation 1 DIOUT VIN - VOUT = 3V to VMAX %/V mV % mV % %/W dB dB TJ = -55 to +150C IOUT = 10mA to IMAX TJ = -55 to +150C VIN - VOUT = 2.5V to VMAX VIN - VOUT = 40V TJ = -55 to +150C VIN - VOUT = 60V (HV SERIES) TJ = -55 to +150C VIN - VOUT 15V TJ = -55 to +150C VIN - VOUT = 40V VIN - VOUT = 60V (HV SERIES) 0.50 0.15 mA mA DIADJ Adjust Pin Current Change IMIN Minimum Load Current 3.5 3.5 0.80 0.20 0.30 1 t = 1000 Hrs 0.3 0.001 TBA 5 7 0.50 0.15 3.5 3.5 0.80 0.20 0.30 5 mA 7 A A % 1 % % C/W ICL Current Limit DVOUT Temperature DTEMP Stability DVOUT Long Term Stability DTIME en RqJC RMS Output Noise (% of VOUT) Thermal Resistance Junction to Case TJ = -55 to +150C TA = +125C f = 10 Hz to 10 kHz LCC4 Package 2 1 1 0.3 0.001 TBA 1) Regulation is measured at constant junction temperature, using pulse testing at a low duty cycle. Changes in output voltage due to heating effects are covered under thermal regulation specifications. Load regulation is measured 1/8" below the base of the package on the output pin. 2) Test Conditions unless othewise stated: VIN - VOUT = 5V , TJ = 25C , IOUT = 0.1A , PMAX = TBA , IMAX = 0.5A VMAX = 40V for standard series , 60V for HV series. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Prelim. 7/00 |
Price & Availability of LM117H
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |